DIY cross legged Picnic Table [Table of contents below]
Cut and fix the rails to the legs
Cut the cross-rails and round the ends.
Note: The intermediate table cross-rails are fixed on their flat (as opposed to being on edge like the rest of them) so take notice when rounding the ends.
Glue and screw rails to the top of each pair of legs, making sure that the tops are flush and the overhang each side of the legs is equal. Refer to the picture below.
TABLE OF CONTENTS
Page 08 Adding the end rails to the legs
Page 09 Drilling bolt holes through the crosses
Page 10 Drilling holes into the ends of the braces
Page 11 Fixing the brace members in place
Page 12 Just the tabletop and bench top boards to go
Page 13 Done!
Page 14 User comments/photos