Build a kids table and bench By Les Kenny
Step 8. Clamp the sides to the tops
Clamp the sides to the tops, so that the side boards are in 90mm from the ends.
The screw holes in the tops should be aligned along the center of the top rail.
Everything being in line and square, screw the tops to the top rails.
TABLE OF CONTENTS
Page 01 Introduction, required tools, before you start note
Page 02 The parts and cutting list
Page 03 Step 1 & 2. Cut the pieces and drill the side boards
Page 04 Step 3. Mark position for the first side board
Page 05 Step 4. Fix the first side board
Page 06 Step 5 & 6. Add and fix the remaining side boards
Page 07 Step 7. Prepare the table top and seat top
Page 08 Step 8. Clamp the sides to the tops
Page 09 Step 9. Add the braces and it's all done