Build a kids table and bench By Les Kenny
Step 6. Fixing the side boards
Using a set square, Rose checked to see that the vertical side boards were square with the top rails and footers.
Once confirmed (everything square), she put in the second screw top and bottom of every board.
That then locked the side boards in square position to the top rails and footers and stopped any possible skewing.
Step 7. Preparing the table & seat tops
Rose placed all the table top boards together on the work surface ensuring all the ends were flush.
She then screwed a cross member (batten) across the middle of the boards.
She then measured in from each end and drew a pencil line across the boards that would determines the line where the screw holes would be drilled. The measurements and in the instructions.
She then proceeded to drill the screw holes according to plan. Rose seemed to be getting more confident as the job progresses.
TABLE OF CONTENTS
Page 01 Roses story
Page 02 Preparation and cutting the pieces
Page 03 Step 2 & 3. Drilling screw holes and marking for the side boards
Page 04 Step 4 & 5. Placing the side boards on the top rails and footers
Page 05 Step 6 & 7. Fixing the side boards and preparing the table and seat tops
Page 06 Step 8 & 9. Clamping and fixing the sides to the tops and adding the braces