Build a kids table and bench By Les Kenny
Step 8. Clamping the sides to the tops
Right, almost there. The table and bench tops are made, and the sides are made.Rose then clamped the sides to the tops (everything in upside down mode at this stage) ensuring the screw holes in the tops aligned with the center of the top rails.
Then the table and bench were flipped upright and the tops screwed to the sides.
Step 9. Adding the braces
Finally, she added a brace to the table and a brace to the seat according to the instructions.
This called for a dab of glue as each brace is only held by one screw at each end, and we don't want any twisting, do we?
TABLE OF CONTENTS
Page 01 Roses story
Page 02 Preparation and cutting the pieces
Page 03 Step 2 & 3. Drilling screw holes and marking for the side boards
Page 04 Step 4 & 5. Placing the side boards on the top rails and footers
Page 05 Step 6 & 7. Fixing the side boards and preparing the table and seat tops
Page 06 Step 8 & 9. Clamping and fixing the sides to the tops and adding the braces